DIY Chop Saw Table Project with Plans
	If you have ever used a chop saw you will know the mess they make. Also, if you don't have a proper setup for using one it is quite a pain to move things around the workroom to make space, set up stands to support longer lengths to be cut and clean up afterward. I came up with the idea of building a chop saw table on castors to address all of these problems in one neat solution. My idea was to design a table that would work for most of the material I cut. The longer lengths may still need an auxiliary stand to help support the weight but it will work as is for most of my needs. I can park it out of the way in the workroom when not in use. I can wheel it outside onto the grass when I want to use it and just leave the dust out there, solving the clean up problem at the same time.
Part 1 of the build		Part 2 of the build
You will need some castors which can be found here:
3" (75mm) Castors on EBay AU		3" (75mm) Castors on EBay UK
3" (75mm) Castors on EBay US		3" (75mm) Castors on EBay CA
Download your PDF plans package here: p0071-A3.PDF